GA7276H Automatic Bollard

The GA7276H Automatic Bollard employs a simple yet effective electrohydraulic mechanism ensuring smooth and efficient movement of the bollard. A manual override facility ensures the bollard can be lowered in the event of an emergency or power failure.

The GA7276H Automatic Bollard is built for performance and has been intensively tested for over 3000 manoeuvres per day. The bollard is controlled by a CDS dedicated control unit, which is capable of controlling up to 4 bollards simultaneously, and includes a “deceleration feature” at the end of travel when opening and closing. For added safety the bollard is fitted with an obstacle detection censor that stops and lowers the bollard if an obstacle is detected. A crown of LED lights is mounted on the top of the cylinder with a built-in acoustic warning signal. The bollard casing is completely independent from the motor allowing it to be pre-installed prior to ground work completion.

The GA7276H Automatic Bollard can easily be integrated with access control and safety equipment, traffic lights, photo cells and ground loops.

Technical Specification

Specification
CE Approved
Electro-hydraulic, steel tube, auto rising bollard
Power Requirement
Single phase 230Volt 50Hz 6 amp
Absorbed Current
1.8 amps
Motor Rotation Speed
2800 rpm
Duty Cycle
Up to 300 cycles per 24 hrs.
Overall Dimensions
Base: 410mm x 410mm x 845mm below ground
Bollard: 200mm x 500mm
Operation Time
6 seconds
Finish
Stainless Steel
Operation
Self-contained hydraulic pump & piston