GA9000 Automatic Sliding Gate

The GA9000 Automatic Cantilever Sliding Gate complies with BS/EN 12453 (the current legislation ALL automated gates must comply with). We fit as standard a number of safety devices. The gate portal is fitted with dual height photocells and 6 Category 3 monitored live safety edges.

The gate is controlled by a purpose made controller, single phase supply, via an inverter controlled output to a 3 phase motor. This can be configured very easily for all the standard program modes including no passage time outs & free exit and entry loops to name a few. As standard the control panel can accommodate pedestrian open signals, airlock systems and much more. The gate's movement is controlled via a rack & pinion system monitored by an encoder. This allows for a precise and controlled operation that is robust and dependable.

The best feature of our gates is that they are fully assembled ready to bolt down and as soon as they are commissioned they are compliant to all standards. This minimises disruption on site and leaves a beautifully finished product which will serve for many years.

The gates are constructed from hi-grade aluminium which is extremely rigid and will not rust for many years to come.

Optional Extras:

  • Razor Wire Extensions
  • Electric Fence
  • Anti-Climb Spikes
  • Traffic Lights
  • Warning Siren
  • Timber Infills
  • Louvre Infills

Options for access control:

  • Keypad
  • Proximity Cards
  • Voice/Video Intercom Access
  • Token Acceptors
  • Remote Control Fobs
  • Key Switch
  • Loop Detectors

Technical Specification

Specification
CE Approved BS/EN 12453
Maximum Span
10 metres Drive-Through
Maximum Height
2.4 metres (max. width 10.0m)
3.0 metres (max. width 8.0m)
Drive Motor
0.55KW’s 3 Phase
Operation
Rack & Pinion
Power Supply
SINGLE Phase 230v, 50Hz, 5 Amps
Duty Cycles
100% Continuous Duty Rating
Colours
All RAL Colours Available