GA9500 Bi-Folding Trackless Speed Gate

The GA9500 Bi-Folding Trackless Speed Gates are the ideal solution where speed of opening and closing is essential or where space is at a premium.

The GA9500 bi-folding trackless speed gates typically open at more than twice the speed of a traditional swinging gate of the same size which ensures a fast throughput of traffic whilst maintaining security of the site.

The GA9500 utilises a PLC controlled, inverter driven single phase power, supplying a 3 phase motor, worm and wheel gearbox with a direct-drive shaft connected to the gate leaf, which ensures a smooth and positive movement. GA9500 speed gates are rated for 100% duty cycle i.e. continuous operation.

The gates are manufactured using a RHS steel frame and CHS tubular steel infills. A wide range of alternate infills are available to suit customers requirements and to match adjoining fencing design. Also available are spiked tops, warning lights and sirens if required.

The gates are supplied with a control cabinet which is mounted in the main pillar of the gate.

Optional Extras:

  • Razor Wire Extensions
  • Electric Fence
  • Anti-Climb Spikes
  • Traffic Lights
  • Warning Siren
  • Timber Infills
  • Louvre Infills

Options for access control:

  • Keypad
  • Proximity Cards
  • Photo Cells
  • Voice/Video Intercom Access
  • Token Acceptors
  • Remote Control Fobs
  • Key Switch
  • Loop Detectors

Technical Specification

Specification
CE Approved BS/EN 12453
Maximum Span
8 Metres Drive-Through
Maximum Height
3 Metres
Finish
Zinc plated and polyester powder coated
Power Requirement
SINGLE phase 240Volt 50Hz 10 amp
Drive Motor
3 phase motor and wormed gearbox
Duty Cycles
100% Continuous Duty Rating
Operation Time
4-8 seconds (dependant on version)